Keeping the screw in your collar

Keeping the screw in your collar (Full Version)

All Forums >> [Casual Banter] >> Off the Grid

Message

ghitaPVH -> Keeping the screw in your collar (1/18/2008 9:03:32 AM)
For those of you who have collars like the eternity collar and other turian style collars held together by a screw. My screw goes all the way through the collar...and it commonly works itself out almost daily. Daddy is constantly having to adjust it to keep it from falling all the way out. Is there anyway, short of locktite (I dont want to make it compleatly impossible to take off) to keep the screw from falling out the bottom?

CalifChick -> RE: Keeping the screw in your collar (1/18/2008 9:08:15 AM)
Have you tried something like dabbing rubber cement on the threads, letting it dry, then rescrewing it? It might give it enough extra gripping power to keep it in place. Cali

stef -> RE: Keeping the screw in your collar (1/18/2008 9:10:26 AM)
Loctite won't make it impossible to remove, if you use the right Loctite. Loctite 222 is a low strength threadlocker that prevents fasteners from vibrating out but is easily removable with hand tools. It should be fine for what you need. ~stef

Nosathro -> RE: Keeping the screw in your collar (1/18/2008 9:31:06 AM)
Loctite 222 is good, you may want to check the screw and the socket for any thread wear as well. Also clean the screw and the socket before adding the Loctite 222. Pipe cleaners and a small brush work well, I use Rubbing Alcohol for a cleaning soluation, it does not cause rust. If you don't have Loctite 222 you can use clear nail polish, a laquar based one works best. The is the one that when you open the bottle you get a smell.

faerytattoodgirl -> RE: Keeping the screw in your collar (1/18/2008 9:36:24 AM)
this thread gives new definition to "screw loose"

thompsonx -> RE: Keeping the screw in your collar (1/18/2008 10:21:55 AM)
ghitaPVH: There is a new hi-tech device on the market. It is called a lock washer.[;)] thompson

popeye1250 -> RE: Keeping the screw in your collar (1/18/2008 10:33:45 AM)
quote: ORIGINAL: ghitaPVH For those of you who have collars like the eternity collar and other turian style collars held together by a screw. My screw goes all the way through the collar...and it commonly works itself out almost daily. Daddy is constantly having to adjust it to keep it from falling all the way out. Is there anyway, short of locktite (I dont want to make it compleatly impossible to take off) to keep the screw from falling out the bottom? Oh c'mon Ghita, use superglue in it! It should be impossible to get off! I'm one of those who think a collar is permanent, that's true ownership.

Page: [1]

Collarchat.com © 2025

Terms of Service

0.03125